Re: Lime Stone Manufacturing Process in SAP

Dear Amit ,

Thanks for the Input ,

(This is a green field Implementation )

Scenario

1. Cao Calcium Carbonate , Crush Limestone would be fed to the Burning Kiln , temp maintained till 1200 deg , the Output product would be subjected to Screening , sieves Plates ,
2. From the Sieve Mesh , the Product will come out depending upon the different sieve size particles into 3 diffferent columns

•           a) Quick Lime 30-to 60 mm (Y1 ton ) Product A
  •    b) Lump Lime 10 to 30 mm (Y2 ton ) Product B
  •    c) Lump Lime 0 to 10 mm (Y3 ton ) product C .

My Concern ,

Feed to the Kiln would be (eg X ton  say 500 ton ; Output will be Y1 ton in Quick Lime depending upon the Mesh size ; Y2  ton in Lump Lime for Size 10 to 30 mm ; Y3  ton in Lump Lime for Size 0 to 10 mm.

So how to map this scenario

In-put  feed Product X ; & While we get 3 Out Put Products A; B ; C

The individual  output quantity of Product A ; Product B & Product C ; is not known before hand ,

Since only after screening the Quantity can be measured .

The Total Out Put is known it should be some where 300 Ton (Summation of  all products A+B+C)

If any one has worked on it can please share their feedback

I have attached the screen shot for the sives/mesh and how teh Product will be filled in columns (A+B+C)

Br

Tallha

Message was edited by: Mohd Tallha Sonalkar